Compliance (DXSpotter Pro)¶

This product complies with the essential requirements of the following EU directives:

Directive	Title
2014/53/EU	Radio Equipment Directive (RED)
2011/65/EU	Restriction of Hazardous Substances (RoHS), as amended by 2015/863
2012/19/EU	Waste Electrical and Electronic Equipment (WEEE)

Radio Equipment Information¶

Per RED Article 10(10)

WiFi Operating Parameters¶

Technology	IEEE 802.11 b/g/n (WiFi)
Operating frequency band	2400–2483.5 MHz
Maximum transmit power	<100 mW (20 dBm) EIRP
Number of channels	13 (EU)
Channel bandwidth	20 MHz
Antenna	Internal (PCB trace, non-removable)

EU Declaration of Conformity¶

Per Radio Equipment Directive 2014/53/EU, Article 10(9)

Hereby, TopBytes Ltd declares that the radio equipment type DXSpotter Pro (Model: DXSPOT-PRO-01) is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available on request from support@topbytes.net.

UKCA Declaration of Conformity¶

DXSpotter Pro (Model: DXSPOT-PRO-01) complies with the relevant UK statutory instruments:

Radio Equipment Regulations 2017
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

FCC Statement¶

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Note

Changes or modifications not expressly approved by TopBytes Ltd could void the user's authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

RF Exposure Information¶

General Statement¶

This device complies with EU and US/UK requirements for limiting exposure of the general public to electromagnetic fields, as assessed in accordance with EN 62311:2020.

DXSpotter Pro is a low-power device that transmits at a maximum of 100 mW EIRP in the 2.4 GHz band. It is designed for tabletop / desktop use and is not intended to be worn on the body or held against the head.

Usage Distance¶

This device has been evaluated for RF exposure compliance at a minimum separation distance of 20 cm between the device and the user's body. At this distance and power level, the electromagnetic field exposure is well below the limits set by Council Recommendation 1999/519/EC (based on ICNIRP guidelines).

Recommendations¶

Use the device on a desk, table, or shelf — not directly against the body
Do not modify the antenna or connect external antennas
If co-locating with other radio equipment, maintain reasonable separation

Safety Warnings¶

Power Supply¶

Use only a USB-C power supply that complies with applicable safety standards (e.g. IEC 62368-1, CE / UKCA / FCC marked). Using a non-compliant power supply may create safety hazards.
The device requires a 5 V DC power supply providing at least 1 A, connected via a USB-C cable that supports data (not charge-only).
Do not exceed the rated input voltage of 5 V DC.
Disconnect the USB-C cable before cleaning the device.
Do not use damaged cables or power supplies.

Operating Environment¶

Indoor use only. This device is not designed for outdoor or weatherproof use.
Operating temperature: 0 °C to +40 °C.
Storage temperature: -20 °C to +60 °C.
Humidity: 20% to 80% relative humidity, non-condensing.
Do not expose the device to moisture, rain, or liquids.
Do not use the device in dusty, dirty, or excessively hot or cold environments.
Do not block ventilation openings or place the device in enclosed spaces without airflow.
Maximum operating altitude: 2000 m above sea level.

General Safety¶

This device is not a toy. Keep out of reach of small children.
Do not disassemble, modify, or attempt to repair the device. There are no user-serviceable parts inside.
Do not expose the device to strong magnetic fields, excessive vibration, or mechanical shock.
If the device emits unusual smells, sounds, or smoke, disconnect the power immediately and contact the manufacturer.
This device is intended for amateur radio hobbyists and general consumers. It is not intended for use in safety-critical, medical, or life-support applications.

LCD Display and Touch Panel¶

The capacitive touch panel responds to bare-finger touches; gloves and styluses without conductive tips will not register.
Do not press the LCD with sharp objects, fingernails, or excessive force — this can permanently damage the panel.
Clean the screen with a soft, dry, microfibre cloth. If liquid is required, use a small amount of distilled water on the cloth and never spray directly onto the screen.
The LCD contains no mercury and uses LED backlighting.
Avoid leaving high-contrast static images on the screen for extended periods to minimise the risk of image retention.

Intended Use¶

DXSpotter Pro is a WiFi-enabled, touchscreen display device designed for amateur radio operators to monitor DX cluster spots and propagation data. It connects to DX cluster servers via your existing WiFi network and to TopBytes servers, which provide a cached copy of HamQSL solar / propagation data, to display real-time information about amateur radio DX activity.

Intended users: Licensed amateur radio operators, radio hobbyists, and general consumers.

Intended environment: Indoor domestic, office, or radio club station environments.

The device is not intended for:

Outdoor installation
Use in explosive or hazardous atmospheres
Medical or safety-critical applications
Use as a primary or sole source of emergency communications information

WEEE — Waste Disposal Information¶

Per WEEE Directive 2012/19/EU, Article 14

Disposal Instructions¶

This product is marked with the crossed-out wheelie bin symbol, indicating that it must not be disposed of with unsorted household waste when it reaches the end of its life.

Correct disposal: Take the product to a designated collection facility for the recycling of waste electrical and electronic equipment (WEEE). Contact your local authority or retailer for information on your nearest collection point.

Why Separate Collection Matters¶

Separate collection and recycling of waste electrical and electronic equipment helps to:

Conserve natural resources
Ensure hazardous substances are handled safely
Protect the environment and human health

Batteries¶

This product does not contain an internal battery. If powered from a USB-C power bank, dispose of the power bank separately in accordance with Directive 2006/66/EC (Battery Directive) or its successor Regulation (EU) 2023/1542.

Producer Information¶

Producer	TopBytes Ltd
WEEE category	Category 3 — IT and telecommunications equipment

Manufacturer¶

Name	TopBytes Ltd
Model number	DXSPOT-PRO-01
Address	55 Kings Ride, HP10 8BP, UK
Website	https://www.topbytes.net
Product support	https://dxspotter.topbytes.net
Email	support@topbytes.net

Firmware Updates¶

DXSpotter Pro supports over-the-air (OTA) firmware updates via WiFi. Firmware updates may include:

Bug fixes and performance improvements

New features

Updates to maintain regulatory compliance

The device checks for updates automatically when connected to the internet. Updates are downloaded securely via HTTPS from the TopBytes update service.